Some banks place an international block on credit cards for fraud reasons. If you call your bank, this block can usually be lifted instantly.

Log into your account, and go under orders. Click the order number you wish to print the invoice for.

This fee is charged from your bank for purchasing internationally. Please call your bank for a refund.

We offer discounts for parts stores, garages and auto repair shops. Please call to inquire.

Our lines are sectioned to help for ease of installation. Each section is joined by a provided union to make for a seamless fit.

Galvan Lines are made from Galvanized Steel tubing. Galvanization is the process of applying a protective zinc coating to steel in order to prevent premature rust and corrosion. Stainless Steel Lines are made from 304L Stainless Steel tubing which is stronger than Galvanized Steel as it contains chromium instead of zinc-covered steel to prevent premature rust and corrosion.

Our lines are constructed from Galfan®coated or Stainless Steel tubing for rust protection with original equipment end forms and fittings. They are bent, Computer Numerically Controlled, for an easy precise installation. Our connectors are Original Equipment which is the North American industry standard for quality. We use stainless steel braided Teflon hoses for rust protection and to prevent surface fouling. These have an unlimited shelf life and anti-static PTFE liner.

We do not sell individual lines from a kit; all of our kits are boxed off the shelf items.

Your connectors may be stuck and hard to remove. This tool will help remove your lines without damaging existing connections that may have to be reused. Please see our video here which demonstrates how to use a Quick Disconnect Tool

The connectors on the existing nylon hoses may be seized due to rust. During removal these connectors are often damaged and non-reusable. The kits come with new connectors to attach to the new fuel lines. Our kits are very easy to splice into your original Nylon Hose using the provided union to make for an airtight connection. Please see our video here which demonstrates how to use our NYLON

An average install will take 3 to 4 hours. We strongly recommend laying your new fuel lines out and replacing the originals one section at a time to help prevent any confusion.

You can access installation instructions on our website under the part you ordered by clicking the red installation instruction button or you can scan the bar code on the label of the box using the camera on your smart phone. Some products have installation videos as well. A link to these can be found on the installation instructions or on our YouTube Channel.

When installing fuel lines, the only time you should have to drop your fuel tank is if you have to replace the nylon lines or hoses that come off of your fuel tank. When installing brake lines, the majority of trucks will require you to drop the tank. There will be some sedans that require the tank to be dropped, but it is not common. If the rear brake line runs between the fuel tank and frame without any room to reach between to remove the line from the plastic clips, you will have to drop it.

Due to the length of some of our lines, we have to put a shipping bend or twist in them in order to fit them in a box to ship. Please see our videos on how to remove aSHIPPING BEND and SHIPPING TWIST.

We offer two shipping options:

1. Free next day shipping - US and Canada only. Orders ship same day if placed before 2:30pm eastern time. Weekends are not shipping days.
2. Ground Shipping - Same day shipping cutoff at 2:30pm eastern time. 3-5 business day delivery time.

Air orders must be placed before 2:30PM EST weekdays to ship same day. Ground orders must be placed before 4PM EST weekdays to ship same day. Any orders placed on weekends will ship on the next business day.