Honda Accord Rear Brake Line Installation

Maintaining your vehicle's braking system is important for both safety and performance. That's why replacing your brake pads, rotors, and calipers is critical if those parts are worn out. However, there is another component of your braking system that often gets overlooked but is just as critical – your brake lines.

Fortunately, if you own a 1998-2002 Honda Accord and need to replace the brake lines, you've come to the right place. In this guide, we'll walk you through the process step by step. Replacing brake lines may seem daunting, but with the right tools and a methodical approach, you can get the job done.

Parts and Tools Needed

Before you begin, gather the following parts and tools:

Parts

1. Rear brake lines kit, like one of the following from LinesToGo:
   • •Honda Accord Rear Brake Line Set 2002 BL-1108-SS1E Stainless Steel
   • •Honda Accord Rear Brake Line Set 2002 2.2L BL-1111-SS1E Stainless Steel
   • •Honda Accord Front Brake Line Set 2000 BL-1109-SS1C Stainless Steel
2. Brake fluid

Tools

• •Jack and jack stands
• •Lug wrench
• •10 mm and 13 mm wrenches
• •10 mm, 12 mm, 17 mm, and 19 mm sockets and socket wrench
• •Drain pan and shop towels
• •Brake bleeder set and cutting pliers

Installation Tips

The following steps cover replacing the rear brake lines on a 1998 to 2002 Honda Accord. For an expanded guide on replacing the rear brake lines, we've put together this video.

1. Safety First
   • •Ensure the car is on a level surface.
   • •Wear safety glasses and gloves to protect yourself from brake fluid spills.
   • •Use jack stands to secure the car while working underneath.
   • •Disconnect the battery to reduce the risk of shorting out the battery on tools or lines.
   • •It's also a good idea to depressurize the fuel line in case it breaks while replacing the brake lines.
2. Preparing the Vehicle
   • •Loosen the lug nuts on the rear wheels before lifting the car.
   • •Lift the rear of the car with a jack and secure it on jack stands.
   • •Remove the rear wheels to access the brake lines.
3. Disconnecting Old Brake Lines
   • •Locate the rear brake hose attached to the brake caliper.
   • •Follow the hose back to where it meets the metal brake line.
   • •Loosen the fittings connecting the brake line to the hose.
   • •Carefully disconnect the old brake lines.
   • •Use a catch pan to collect any dripping brake fluid.
4. Removing Old Lines
   • •Trace the old brake lines along the vehicle's undercarriage.
   • •Use the cutting pliers to carefully remove the old lines.
   • •Be cautious not to damage surrounding components.
5. Installing New Brake Lines
   • •Route the new brake lines along the same path as the old ones.
   • •Attach the new lines to the brake calipers.
   • •Tighten the fittings securely.
6. Bleeding the Brake System
   • •Attach a brake fluid bleeder kit to the brake caliper.
   • •Open the bleeder valve and bleed the brake fluid until it is clear and free of bubbles.
   • vWhile bleeding the brakes, keep the master brake cylinder reservoir topped off with brake fluid.
7. Testing the Brake System
   • •Pump the brake pedal to build pressure in the system.
   • •Check for any leaks around the new brake lines.
   • •Reinstall the rear wheels and lower the car.

Order Replacement Brake Lines From LinesToGo

LinesToGo has the quality brake lines you need for just about any vehicle. Each line is pre-bent, using CNC precision bending to ensure they match the shape of the original brake line - no modifications ever needed. Our stainless-steel brake lines are constructed from 304L stainless steel or Galfan® coated steel and are designed to resist corrosion, surface fouling, and rust.

If you have questions or need help with your order, give us a call to speak to our lines experts, or contact us online today.