What Makes Pre-Bent Fuel Lines Better?
Fuel lines are an integral part of your vehicle’s fuel system. When it comes time to replace them, only the best quality parts are worth using. Deciding between generic fuel lines that need bending or pre-bent fuel lines? Then this is the article for you.
We will look into the pros and cons of both and explain why pre-bent fuel lines are always the better option.
Replacing Your Fuel Lines
If you are lucky, you may not need to replace your fuel lines for the life of the car. But fuel lines can easily be damaged or broken. When your car is running poorly, smells of fuel, or keeps stalling it may be time for new fuel lines. Read our blog here for more information on diagnosing your fuel line problems.
The next step is deciding on whether to buy pre-bent fuel lines or bend them yourself.
Bending Your Own Fuel Lines
Image Credit: LS1Tech
Pros:
- •Lower cost
Cons:
- •Can weaken lines if bent incorrectly
- •May pinch fuel line restricting fuel flow
- •Fuel line may not fit right
Buying a fuel line you must bend yourself may cost a little less than a pre-bent part. That initial saving may cost you more in the end, though. If the fuel line is bent incorrectly, it may rub against the undercarriage. Or restrict fuel flow, weaken, and cause a fuel leak.
The time, tools and effort required to bend and fit a fuel line the right way make this option unsuitable for most DIYers and casual mechanics - and most owners agree:
“…put new lines in my car last year and put in pre-bent. IMHO, it would be very hard to bend them yourself – it’s hard to put them in in some places.”
Bill Scott, Ford Mustang owner.
Another Ford owner had this to say:
“I second the pre-bent opinion. I finished installing all the steel lines in my car. It took me about ten minutes to install both the front-to-back brake and fuel lines. They fit just about perfectly; a little coaxing was required here and there, but it was a piece of cake.”
Pre-Bent Fuel Lines
Pros:
- •Fit right every time
- •Easier to install
- •No need to worry about kinks, pinching, or weak spots
Cons:
- •It may cost a bit more upfront
At LinesToGo we sell pre-bent fuel lines for 17 different manufacturers and dozens of models. We have over 170 different fuel lines for Buicks alone.
All our fuel lines are pre-bent and an exact match for factory parts. This makes them easier to install, saving you time and money. You may find unbent fuel lines for less. But the added hassle and potential damage to your fuel system are never worth it.
Order Your Pre-Bent Fuel Line From LinesToGo
There are several good reasons why pre-bent fuel lines are the way to go:
- •They fit exactly as the OE parts did
- •They are easier to install
- •They won’t crimp, weaken or break
Our fuel lines, including the end forms and fittings, perfectly match OE factory items. They are pre-bent and ready to install. All our fuel lines are Galfan® coated steel or 304L stainless steel tubing for superior rust protection.
Ignoring a damaged fuel line can be dangerous. If fuel leaks out it can become a fire hazard. A dented or crimped fuel line will restrict fuel flow which may cause the engine to run poorly. Don’t wait until it’s too late; get in touch with LinesToGo today and get your pre-bent fuel lines shipped today.
We offer free next-day shipping, and for mainland USA & Canada, orders can ship the same day if ordered before 2:30pm EST (Express) and 4:00pm EST (Ground).
