Toyota Tacoma Brake Line Set 2004 Base 4WD Reg Cab 6ft Bed 2.7L BLT-123-SS1B Stainless Steel
4WD w/ABS
Toyota Tacoma Brake Line Set 2004 Base 4WD Reg Cab 6ft Bed 2.7L BLT-123-SS1B Stainless Steel
4WD w/ABS
Delivery Time & Rates
Choose from 2004 Tacoma brake lines stainless steel to fit your Toyota without a problem...
Stainless Steel Brake Line Set 2004 Toyota Tacoma Base Model 4WD Regular Cab 6ft Bed w/ABS for 2.7L engines
Please Note: Before installing your brake line, shipping bends will need to be removed from the lines labeled BLT118-03A-SS and BLT118-06A-SS. See the video below on how to remove the shipping bend
- Weight: 6
- Installation Instructions
Master Cylinder Primary Line runs from Back Port of Master Cylinder to ABS Motor, Master Cylinder Secondary Line runs from Front Port of Master Cylinder to T-Union, Master Cylinder Secondary Line runs from T-Union to ABS Motor, Left Front Brake Line runs from ABS Motor to Left Front Brake Hose Connection, Right Front Brake Line runs from ABS Motor to Right Front Brake Hose Connection, Vehicle Stability Control Line runs from T-Union at Master Cylinder to Factory Union under Cab, Vehicle Stability Control Line runs from Factory Union under Cab to Rear Load Sensing Valve, Intermediate Brake Line runs from ABS Motor to Factory Union under Cab, Intermediate Brake Line runs from Factory Union under Cab to Rear Load Sensing Valve, Intermediate Brake Line runs from Rear Load Sensing Valve to Rear Axle Brake Hose Connection, Left Rear Axle Brake Line runs from Frame Mounted Junction Block to Left Front Brake Hose Connection, Right Rear Axle Brake Line runs from Frame Mounted Junction Block to Right Front Brake Hose Connection
1 Master Cylinder Primary Brake Line 3/16", 2 Master Cylinder Secondary Brake Lines 3/16", 1 Left Front Brake Line 3/16", 1 Right Front Brake Line 3/16", 2 Intermediate Brake Lines 3/16", 1 Intermediate Brake Line 3/16" (in 2 easy to install sections), 1 Vehicle Stability Control Line 3/16", 1 Vehicle Stability Control Line 3/16" (in 2 easy to install sections), 1 Rear Axle Crossover Line 3/16" (2 sections), Does NOT Include Brake Hoses
Lines are constructed from Stainless Steel Tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation
Need Assistance? Call us toll free 1-855-781-5992
We'll make sure you're ordering the correct part and we can take your order for you too.
